Metra 99-6543HG handleiding
Handleiding
Je bekijkt pagina 9 van 16
REV. 11/16/23 INST99-6543HG
9
PROGRAMMING FINAL ASSEMBLY
1. Refer to step 2 from the Installation section.
2. Press the push-to-start button to start the vehicle.
3. Program the kit:
a. Once the touchscreen display loads up, select the vehicle type.
b. Wait until the radio comes on, and the touchscreen display shows SWC Configured.
This process may take up to 3 minutes.
Note: If the touchscreen display does not load up, or the radio doesn’t come on within
3 minutes, and then disconnect the 6543 harnesses from port “A” in the touchscreen
display. Check all the connections, reconnect the harness into the touchscreen display,
and then try again.
4. Cycle the key off, then back on. If the driver’s door is closed, open and close the door.
5.
Refer to the Settings page within the Touchscreen Display Operation section. Ensure that all
factory features have been selected properly according to the options available for the vehicle.
6. Test all functions of the installation for proper operation, before reassembling the dash.
Note: The clock and compass in the driver’s information center will no longer be functional.
1. Secure the completed assembly into the upper dash using the factory hardware.
2. Reassemble the center console and dash in reverse order of disassembly.
Bekijk gratis de handleiding van Metra 99-6543HG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 99-6543HG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1886 MB |
