Metra 99-5864CH handleiding
Handleiding
Je bekijkt pagina 11 van 40
REV. 10/5/23 INST99-5864CH
11
PROGRAMMING FINAL ASSEMBLY
1. Secure the completed assembly into the upper dash using the factory hardware removed in
Dash Disassembly, step 5.
2. Snap the radio trim panel over the completed assembly, then reassemble the dash in reverse
order of disassembly to complete the installation.
1. Connect the car side harness into Port C, and then to the wiring harnesses in the vehicle.
Note: This is a timed process.
Cycle ignition on.
Note: The right knob should show DZ (or a 2). If not, select that option using the steps below.
2. Turning the left knob will guide you through the options on “kit”
3. Turn right knob to change setting for that option.
4. Turn right knob to cycle through your options until you find the “done” option.
5. Press the “Dual” button exit (“Dual button will act as an Enter button”)
Bekijk gratis de handleiding van Metra 99-5864CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 99-5864CH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4647 MB |
