Metra 99-5864CH handleiding
Handleiding
Je bekijkt pagina 10 van 40
386.257.1187
|
MetraOnline.com
10
Climate control panel
1. Connect the 16-pin harness with stripped leads into port A.
2. Connect the 14-pin harness with stripped leads into port B.
3. Connect the FD3 harness into port C, and then to the wiring harnesses in the vehicle.
These harnesses are the ones removed in Dash Disassembly, step 7.
4. Port D is a Micro-B USB input for updating the Axxess interface.
A
B
C
D
HVAC interface
5. Connect the HVAC interface harness into the HVAC interface, and then to the
wiring harnesses in the vehicle. These harnesses are the ones removed in
Dash Disassembly, step 4.
Attention! Disregard the 10-pin connector from the HVAC interface harness,
it will not be used in this application.
6. Connect the 4-pin flat to 4-pin stacked harness into the HVAC interface, and then to the
passenger airbag light assembly.
7. Connect the 6-pin harness from the car side harness to the HVAC interface.
8. Locate the factory antenna connector in the dash and complete all necessary
connections to the radio. Use the antenna adapter provided to adapt the factory
antenna connector to the aftermarket radio.
INSTALLATION
Bekijk gratis de handleiding van Metra 99-5864CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 99-5864CH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4647 MB |
