Metra 99-5858CH handleiding
Handleiding
Je bekijkt pagina 9 van 16
REV. 2/19/24 INST99-5858CH
9
PROGRAMMING FINAL ASSEMBLY
1. Slide the radio into the dash location where the factory radio chassis was removed from.
Secure using the factory screws.
2. Reassemble the dash in reverse order of disassembly using the 99-5858CH radio bezel to
complete the installation.
1. Open the driver’s door and keep open during the programming process.
2. Cycle the ignition on.
3. Connect the 5858 harness to the wiring harness in the vehicle.
4. Once the touchscreen display loads up, select the vehicle type.
5. Wait until the radio comes on and the touchscreen display shows: SWC Configured!
6. Cycle the ignition off, then back on.
7. Test all functions of the installation for proper operation. (a)
(a) If the interface fails to function, press the Reset Vehicle Type button mentioned in System
Configuration, then resume from step 4.
Bekijk gratis de handleiding van Metra 99-5858CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 99-5858CH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1750 MB |
