Metra 99-3018S handleiding
Handleiding
Je bekijkt pagina 4 van 32
1.800.221.0932
|
MetraOnline.com
4
DASH DISASSEMBLY
(CONT.)
Unless otherwise stated, ensure that the
vehicle is completely off before proceeding
onto the following steps:
5. Remove (2) 9/32” screws from the
bottom of the radio/climate control
panel and unplug & remove the panel
(Figure G)
(WARNING!!! Do not unplug the panel
if the vehicle has factory navigation,
continue to step 6).
6. Navigation models only: With the radio/
climate control panel still connected,
cycle the key to accessory, and then
press the button on the upper left of
the panel to raise the navigation screen.
Remove (3) 9/32” screws holding
the screen into the dash, unplug and
remove the screen, turn the key to
the off position, and then remove the
key from the ignition. Now it is safe to
unplug and remove the radio/climate
control panel. (Figure H)
Note: Failure to follow this step
properly will result in the airbag light
illuminating in the instrument cluster.
7. Remove (4) 9/32” screws from the radio
chassis, and then unplug and remove
the radio chassis from the dash.
(Figure I)
Continue to Kit Preparation
(Figure I)(Figure G)
(Figure H)
Bekijk gratis de handleiding van Metra 99-3018S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 99-3018S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3504 MB |
