Metra 95-7640B handleiding
Handleiding
Je bekijkt pagina 18 van 48
18
386.257.1187
|
MetraOnline.com
PROGRAMMING
Note: This is a timed process.
1. Connect the car side connectors to connectors removed from the factory radio in the vehicle.
2. Press the push-to-start button to start the vehicle.
3. Program the kit:
a. Once the touchscreen display loads up, select the vehicle type.
b. Wait until the radio comes on, and the touchscreen display shows SWC Configured.
4. This process may take up to (3) minutes.
Note: If the touchscreen display does not load up, or the radio doesn’t come on within (3)
minutes, and/or the touchscreen display does not show SWC Configured, check all connections,
then reset the interface and try again. Refer to page 24 for reset instructions.
5.
Cycle the key off. If the driver’s door is closed, open and close the door. Cycle the key back on.
6. Test all functions of the installation for proper operation, before reassembling the dash.
Continue to Touchscreen Display Operation
Bekijk gratis de handleiding van Metra 95-7640B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 95-7640B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7030 MB |
