Metra 95-7299B handleiding

Niet gecategoriseerd

Metra

32 pagina's

PDF beschikbaar

Handleiding

386.257.1187

MetraOnline.com

STEERING WHEEL CONTROL SETTINGS

Continued on the next page

LED Feedback: The (24) Red LED flashes

represent a different radio manufacturer for

the SWC interface to detect. For example,

if you are installing a JVC radio, the SWC

interface will flash Red (5) times, then stop.

Following is the LED Feedback Legend,

which indicates the flash count of the radio

manufacturer.

Flash Count

Radio

Eclipse (type 1) †

Kenwood ‡

Clarion (type 1) †

Sony / Dual

JVC

Pioneer / Jensen

Alpine *

Visteon

Valor

Clarion (type 2) †

Metra OE

Eclipse (type 2) †

Flash Count

Radio

Parrot **

XITE

Philips

TBA

JBL

Insane

Magnadyne

Boss

Axxera

Axxerra (type 2)*

Alpine (type 2)*

LED Feedback Legend

KEYNOTES

* If the SWC interface flashes Red (7) times, and an Alpine radio is not installed, that means there is an open connection not accounted for. Verify that the 3.5mm jack is connected to the correct

steering wheel jack/wire in the radio.

** The AXSWCH-PAR is required (sold separately). Also, the software in the radio must be rev. 2.1.4 or higher.

† If a Clarion or Eclipse radio is installed and the steering wheel controls do not function, change the radio to Clarion (type 2) or Eclipse (type 2) respectively. If the steering wheel controls still do not

function, refer to the Changing Radio Type chart in the next section or at axxessinterfaces.com.

‡ If a Kenwood radio is installed and the LED feedback flashes (5) times instead of (2), manually change the radio type to Kenwood. To do this, refer to the Changing Radio Type document in the next

section or available at axxessinterfaces.com.

Bekijk gratis de handleiding van Metra 95-7299B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.