Metra 95-6559B handleiding
Handleiding
Je bekijkt pagina 3 van 20
REV. 5/28/2025 INST95-6559B
3
KIT PREPARATION
From the factory control panel:
1. Pull the three knobs from the front of
the factory climate controls. They come
apart in three pieces. An outer ring, a
button and a rubber keypad or two.
(Figure A)
2. Remove (8) T-8 torx screws from the
back cover. (Figure B)
3. Unclip and flip up the larger circuit
board to expose and remove (6) Torx
T-8 screws. (Figure C)
4. Remove 10 T-8 Torx screws from the
outer edges of the circuit boards.
(Figure C)
5. Remove the circuit boards, rubber
keypads, and button assemblies.
Continued on the next page
(Figure B) (Figure D)
(Figure A) (Figure C)
Bekijk gratis de handleiding van Metra 95-6559B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 95-6559B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2640 MB |
