Metra 108-FD2B handleiding
Handleiding
Je bekijkt pagina 3 van 12
REV.
12/9/22
INST108-FD2B
3
KIT PREPARATION KIT ASSEMBLY
1. Remove the factory module from the
top of the sub-dash, then relocate it
down to allow room for the aftermarket
radio. The mounting brackets attached
to the module will need to be bent
outward to make room for the radio.
2. Unclip the traction control button from
the factory radio/climate control panel,
then clip it into the radio trim panel
with touchscreen display. (Figure A)
3. Attach the (4) panel clips provided to
the radio/display panel. (Figure B)
Continue to Kit Assembly
(Figure B) (Figure B)
(Figure A) (Figure A)
Note: For steps 1 and 2, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1. Secure the radio brackets to the radio
chassis using (4) screws supplied with
the radio. (Figure A)
2. Secure the radio display to the radio
brackets using (4) screws supplied with
the radio. (Figure B)
Continue to Axxess
Interface Installation
Bekijk gratis de handleiding van Metra 108-FD2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 108-FD2B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1711 MB |
