Metra 108-FD2B handleiding
Handleiding
Je bekijkt pagina 2 van 12
2
386.257.1187
|
MetraOnline.com
DASH DISASSEMBLY
1. Open and lower the glove box, then
remove (3) 10mm bolts facing up from
inside the glove box opening. (Figure A)
2. Remove (1) 7mm screw securing the
trim panel to the right of the radio, then
unclip and set to the side. (Figure B)
3. Unclip the trim panel to the left of the
radio and slightly move aside to access
the radio/climate panel top left screw.
(Figure C)
4. Open the compartment below the
climate controls.
5. Remove (4) 9/32” screws securing
the radio/climate control panel to the
dash, then unclip, unplug, and remove.
(Figure D)
6. Remove (4) 7mm screws securing the
radio chassis. Slide the chassis out, then
unplug and remove. (Figure E)
7. Remove (4) 7mm screws securing the
radio display, then unplug and remove.
(Figure E)
Continue to Kit Preparation
(Figure A)
(Figure B)
(Figure E)
(Figure C)
(Figure D)
Bekijk gratis de handleiding van Metra 108-FD2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 108-FD2B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1711 MB |
