Metabo RW 18 LTX BL 120 handleiding
Handleiding
Je bekijkt pagina 12 van 76
ENGLISHen
12
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
Chargers: ASC 145, etc.
Battery packs with different capacities. Buy
battery packs only with voltage suitable for your
power tool.
5.5 Ah (LiHD), order no.: 625368000
8.0 Ah (LiHD), order no.: 625369000
10.0 Ah (LiHD), order no.: 625549000
etc.
4.0 Ah (Li-Power), order no.: 625027000
etc.
See www.metabo.com or the catalogue for a
complete range of accessories.
Repairs to electrical tools must only be carried out
by qualified electricians!
A defective mains cable must be replaced only with
a special, original mains cable from Metabo
available from the Metabo service.
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Packaging materials must be disposed of according
to their labelling in accordance with municipal
guidelines. Further information can be found at
www.metabo.com in the “Service” section.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Special notes regarding cordless machines:
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
Explanatory notes regarding the specifications on
page 3.
Subject to change in accordance with technical
progress.
P
1
= Rated input
P
2
= Power output
U = Voltage of battery pack
n
0
= Idle speed
n
1
= On-load speed
G = Tool mount (thread)
D
R
= maximum permitted diameter/width of the
mixing paddle
D = Collar diameter
m = Weight with smallest battery pack/weight
(without cord)
Measured values determined in conformity with
EN 62841.
Permitted ambient temperature during operation:
-20 °C (-4°F) to 50 °C (120°F) (limited performance
with temperatures below 0 °C (32°F)). Permitted
ambient temperature for storage: 0 °C (32°F) to
30 °C (86°F).
Machine in protection class II
~ AC Power
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 62841:
a
h, D
=Vibration emission value
K
h,D
=Uncertainty (vibration)
Typical A-effective perceived sound levels:
L
pA
= Sound pressure level
L
WA
= Sound power level
K
pA
, K
WA
= Uncertainty
Wear ear protectors!
11. Repairs
12. Environmental Protection
13. Technical Specifications
Bekijk gratis de handleiding van Metabo RW 18 LTX BL 120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metabo |
| Model | RW 18 LTX BL 120 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10217 MB |
