Mestic MS-130 handleiding
Handleiding
Je bekijkt pagina 12 van 45
There is a strange noise coming
from the vacuum.
The airflow may be restricted or blocked. Check for blockages and clean
the filter and pole.
If the problem persists, contact the Customer Support team.
Cleaning & Care
Note: Ensure the appliance is turned off and unplugged from the mains before emptying the dust tank.
Emptying the Dust Tank:
Hold the unit over a bin and press the dust tank release button. Empty the contents of the dust tank. Once empty,
push the cover back into place until there is an audible click.
Cleaning the Filter:
1. Press the filter release button to open the filter housing.
2. Remove the filter from the dust tank.
3. Tap it lightly against a dustbin or sink to remove particles.
4. Wash the filter regularly to ensure maximum suction performance. Allow to dry thoroughly before
replacing it into the unit.
Cleaning the Unit Body:
1. Before cleaning the unit body, ensure the unit is disconnected from the mains supply and not in
operation.
2. Use a damp cloth to clean the unit body. Never use any abrasive cleaning materials or solvents, as these
could cause damage to the surface of the unit.
WARNING! DO NOT allow any liquids into the unit, as this could cause damage to the electrical components and
cause it to malfunction.
Cleaning the Interchangeable floor head brush bar:
1. Remove the brush bar.
2. Remove fluff, hairs and other dirt from the brush.
3. Refit the brush bar.
Clearing Blockages:
If the dust tank is overfilled, the filter is clogged up, or the vacuum picks up a larger piece of debris, the vacuum
may become clogged.
Should this occur, carry out the following steps to unclog the vacuum:
1. Check the dust tank and empty it if necessary.
2. Check the filter for any debris and rinse it under running water if necessary, as detailed in the sections
above.
3. Detach any attachments from the unit and check for blockages.
Storing the Appliance:
1. Store the appliance in a cool, dry place, preferably inside its original packaging, and out of the reach of
children.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This
means that this product must be handled pursuant to European Directive 2012/19/EU in order to
be recycled or dismantled to minimize its impact on the environment. For further information,
please contact your local or regional authorities. Electronic products not included in the selective
sorting process are potentially dangerous for the environment and human heath due to the
presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MS-130, applies all basic requirements and other relevant
regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage
directive (2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the
backside of this manual
Bekijk gratis de handleiding van Mestic MS-130, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mestic |
| Model | MS-130 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5341 MB |