Mestic BA-2600 handleiding
Handleiding
Je bekijkt pagina 23 van 162
Ventilation mode
1. Press the on/off button to turn the unit on.
2. Press the Change Mode button and select 'Ventilation'.
3. Use the selection buttons to set the ambient temperature to the desired value between 18°C and 30°C.
4. Press the fan speed key and select one of the options low/medium/high/automatic.**
5. The selected mode is stored in the memory.
Heat pump mode
1. Press the on/off button to turn the unit on.
2. Press the Change Mode button and select the 'Heat Pump' option.
3. Press the selection buttons to set the ambient temperature to the desired value between 18°C and 30°C.
4. Press the fan speed button and select one of the options low/medium/high/automatic.**
5. The selected mode is stored in the memory.
Night mode
1. Press the on/off button to turn the unit on.
2. Press the Change Mode button to select the desired mode from the available modes.
3. Press the Night Mode button to toggle this function on and off.
4. Press the selection buttons to set the ambient temperature to the desired value between 18°C and 30°C.
5. In this mode, the ventilation is set to low speed. It is therefore not possible to use the other available options.
6. The selected mode is stored in the memory.
Timer Off mode
1. Press the on/off button to turn the unit on.
2. Press the Change Mode button to select the desired mode from the available modes.
3. Press the selection buttons to set the ambient temperature to the desired value between 18°C and 30°C.
4. Press the Fan Speed button and select one of the options Low/Medium/High/Auto. **
5. Press the Timer Off button to set the time when the unit should switch off. ***
6. Use the Up and Down arrows to change the time when the unit should switch off.
7. Press the Timer Off button to confirm the entered data.
8. Press the Timer Off button a third time to deactivate this function.
Timer On mode
1. The machine must be off.
2. Press the Timer On button to set the time when the unit must be switched on. ****
3. Press the selection buttons to change the time when the unit must be switched on.
4. Press the Timer On button to confirm the entered data.
5. Press the Timer Off button a third time to deactivate this function. At the set time, the appliance will start in automatic mode.
** In automatic mode, the correct ventilation is set according to the temperature difference between the setpoint and the ambient
temperature.
*** The first time you press the button, the symbol on the display flashes to indicate that you are programming a switch-off. Press the
button a second time to save the data and the symbol will remain on to indicate that the timer off function has been activated. Press
a third time to cancel the Timer Off function.
**** The first time you press the button, the symbol on the display flashes to indicate that you are programming a switch-off. Press a
second time to save the data and the symbol will remain on to indicate that the Timer On function has been activated. Press the
button a third time to deactivate the Timer On function.
Installing and changing the remote control batteries.
Remove the battery cover. Insert two AAA batteries, observing the correct polarity. Replace the battery
cover. Check that the remote control works correctly by pressing the ON button. If no symbol appears
on the display when you press the button, reinsert the batteries, checking the polarity.
Bekijk gratis de handleiding van Mestic BA-2600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mestic |
| Model | BA-2600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32132 MB |
