Mercusys MS118CP handleiding
Handleiding
Je bekijkt pagina 7 van 18
3
Unmanaged Rackmountable Switches
Introduction
Switch Indication
Priority
(Only for MS118CP)
Off: All the ports transmit data with the same priority.
On: The specific ports transmit data with a higher priority than other ports.
Recovery
(Only for MS118CP)
Off: The PoE Auto Recovery function is disabled.
On: The switch will constantly detect the working status of a PoE powered device (PD).
When the switch finds that the PD works abnormally, the switch will reboot it.
Note: The numbers indicate the ports where the feature takes effect. For example, when
Extend 1-8 is toggled to On, the Extend mode will be enabled for ports 1-8.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10 Mbps, 100 Mbps or 1000 Mbps.
10/100Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10 Mbps or 100 Mbps. For MS118CP, port 1–16
can provide power for PDs.
SFP Port
Designed to install the SFP module. MS118CP has 2 SFP ports which support 1000 Mbps SFP module
connection. An SFP Port (port 17F/port 18F) and the associated 10/100/1000 Mbps RJ45 Port (port
17/port 18) are called a “Combo” port, which means they cannot be used simultaneously.
■
Rear Panel
The rear panel is shown as the following figure. Here we take MS118CP as an example.
Figure 1-4 Rear Panel
Kensington Security Slot Grounding Terminal Power Socket
Kensington Security Slot
Secure the lock (not provided) into the security slot to prevent the device from being stolen.
Note:
Only MS118CP has a kensington security slot.
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground the switch through
the PE (Protecting Earth) cable of AC cord or with Ground Cable.
Power Socket
Plug the female connector of the power cord directly into the power socket and plug the male connector
into an AC outlet. Make sure that the voltage of the power supply meets the requirement of the input
voltage (100–240 V ~ 50/60 Hz).
Caution:
You should use the provided power cord.
Bekijk gratis de handleiding van Mercusys MS118CP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mercusys |
| Model | MS118CP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1706 MB |