Mercury 1200 Dual Fuel handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 34 van 48
INSTALLATION
Check the appliance is electrically safe when you have nished.
30
Bracket
Locating slot
2
Fitting the Side Panels
1. Loosen the screw in the ue vent (Fig. 9.8).
2. Inside the top of the side panel top are two tabs.
Connect these tabs into the cut-outs in the top edge of
the cooker (Fig. 9.9).
3. Slide the side panel back so that the side panel bracket
in the base connects to the rear retaining washer and
the slotted tab at the top rear connects onto the screw
in the ue vent (Fig. 9.10).
4. Check everything is rmly connected and tighten
the screw in the ue vent to secure the side panel in
position (Fig. 9.8).
5. Note: If a side panel is loose, t one of the extra gaskets
to the inner face of the front bracket locating tabs (Fig.
9.9) and ret.
6. Note: The bottom front of the side panels will be loose.
These are secured once the bottom panel (plinth) is
tted.
Fig. 9.8
Fig. 9.9
Fig. 9.10
bk
Connect tab into
side bracket
Gasket

Bekijk gratis de handleiding van Mercury 1200 Dual Fuel, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMercury
Model1200 Dual Fuel
CategorieFornuis
TaalNederlands
Grootte7731 MB