Mennekes AMTRON Light 11 C2 handleiding
Handleiding
Je bekijkt pagina 25 van 100
8
LED Info bar 4.2
The LED info bar displays the operating status of the charging
station. The colour scheme (green / blue) for "Operational /
Charging" depends on the setting of the configuration
switches during the setting-up process.
LED info bar Description
lit blue
permanently
Ready for operation
The charging station is operational; no
vehicle is connected to the charging
station.
flashes blue
Once-off authorisation (Standard E,
Basic (E/R) only)
The charging station is authorised for a
single charging process; no vehicle is
connected to the charging station.
pulsating
green
Ready to charge: vehicle pauses
All requirements for charging an electric
vehicle are met.
A charging process is not taking place.
The charging process is paused due to a
vehicle feedback or was terminated by the
vehicle.
lit green
permanently
Charging enabled
All requirements for charging an electric
vehicle are met. Charging in progress.
flashes
green
Overtemperature warning
The charging station reduces the charging
current to prevent overheating and
deactivation.
flashes
white
Wait time
Connection to the vehicle is established.
Charging at the vehicle or at the charging
station has been terminated. Waiting for
removing the charging cable from the
vehicle.
lit red
permanently
Flashes red
Fault
A fault prevents the vehicle from charging.
See Chapter "Troubleshooting" on
page 12.
Multi-function button 4.3
Fig. 8: Multi-function button
The multi-f
unction button has several functions:
A Terminating an on-going charging process (only for
charging stations without authorisation) and
acknowledging of errors.
B Re-activating the residual current circuit breaker (RCCB)
and / or circuit breaker (CB) in case of failure.
C Triggering the test-function of the residual current circuit
breaker (RCCB).
4.3.1 T
erminating an on-going charging process
The charging process by charging stations without
authorisation (Start (E), Light and Pro) can be terminated with
the multi-function button.
Press the multi-function button to terminate a chargi
ng
p
rocess.
Bekijk gratis de handleiding van Mennekes AMTRON Light 11 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mennekes |
| Model | AMTRON Light 11 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18307 MB |
