Megger PAT250 handleiding
Handleiding
Je bekijkt pagina 34 van 42
www.megger.com
PAT250SX
34
Battery and Fuse replacement
12. Battery and Fuse replacement
Battery type: 8 x 1.5 V Alkaline LR6 (AA) or NiMH HR6 rechargeable
Battery condition is shown by the following display symbols:
100%
Full
75%
50%
25%
<25% Exhausted (Flashing)
To replace batteries or fuse:
Switch off the instrument.
Disconnect the instrument from all electrical circuits.
12.1 Battery replacement
Remove the battery cover from the base by using a cross head screwdriver to unscrew the battery cover fixing screw.
Spent Alkaline and NiMH batteries are classified as portable batteries and should be disposed of in the UK in
accordance with Local Authority requirements. For disposal of batteries in other parts of the EU contact your local
distributor.
Megger is registered in the UK as a producer of batteries. The Registration number is BPRN 00142
12.2 For battery replacement:
1. Remove old cells and refit new batteries
following correct polarity as marked on
the battery holder.
Either: 8 x 1.5 V AA / LR6 Alkaline
8 x 1.2 V AA / LR6 NiMH
2. Replace the battery cover.
WARNING : Incorrect battery cell polarity can
cause electrolyte leakage, resulting in damage
to the instrument.
WARNING : Do not mix battery technologies
WARNING : Do not use batteries with different
charge state.
Bekijk gratis de handleiding van Megger PAT250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Megger |
| Model | PAT250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7085 MB |
