MDT SCN-P360L3.03 handleiding
Handleiding
Je bekijkt pagina 22 van 65
Technical Manual Presence Detector SCN-x360xx.03
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Telephone: +49-2263-880 • knx@mdt.de • www.mdt.de
22
22
Active sensors
The active sensors can be set for each light channel. This allows the detection range of the channel to
be limited. For example, if only one area in a corridor is to be detected, only one sensor can be
activated. Please refer to the illustration at 2.4 Structure & Handling for the alignment of the sensors.
Note: Due to the lens optics, the individual areas of each sensor scatter. An overlap between sensors
is therefore possible and thus no sharp separation between the areas.
Fully automatic
If the presence detector is set as fully automatic, every detected presence causes the output to
switch on and is switched off again after the follow-up time has elapsed.
Half automatic (manual switching)
In half-automatic mode, the output is switched on via the object "External push-button short" and
automatically switched off again after the follow-up time has elapsed.
Monitoring time slot
The monitoring time slot is available for the HVAC. This causes a longer detection to be required for
switching on. To switch on the channel, at least one detection must have taken place in each of the
set monitoring time windows.
The length of the monitoring time slot determines how long the system waits for a detection within a
time slot.
The follow-up time describes the time that elapses after the last detection of a movement until the
output is switched off. The follow-up time can be set differently for Day/Night. For example, with a
follow-up time of 3 minutes, the light would be switched on for at least 3 minutes if movement was
detected. Each new detection leads to a retriggering and thus a restart of the follow-up time.
Bekijk gratis de handleiding van MDT SCN-P360L3.03, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-P360L3.03 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 0 MB |
