MDT SCN-P360D1.01 handleiding
Handleiding
Je bekijkt pagina 11 van 26
Technical Manual – Presence Detector SCN-P360D1.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
11
11
• Day/Night object
By using the day/night object, the presence detector can be switched into a day or night
mode. So extended functions in the submenus are available for configuring the presence
detector for a day and a night mode. For example different dimming levels can be adjusted
for day (e.g. 100%) and night (e.g. 30%) or a orientation light can be switched on via a second
switching object at night.
• Presence info functiom
The presence info function can show an additional object for notificating presence. If the
day/night object is active, a relation between these both objects can be adjusted.
The presence info function can trigger an alarm function or being used for statistic purpose.
• Force control release time
The force control release time defines the time wihich must expirate until the presence
detector changes from the manual mode into the automatic mode.
• Cyclical sending “heartbeat”
The function Cyclical sending “heartbeat” shows an object, which can be used for the
cyclically observation of the presence detector. By using a superior control, it can be
supervised if the presence detector is still on the bus or not. Especially in complex systems,
the cancellation of lines or devices can be detected automatically.
Bekijk gratis de handleiding van MDT SCN-P360D1.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-P360D1.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4454 MB |
