MDT SCN-P360D1.01 handleiding
Handleiding
Je bekijkt pagina 10 van 26
Technical Manual – Presence Detector SCN-P360D1.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
10
10
4 Reference ETS-Parameter
4.1 General
The following figure shows the submenu for the general settings:
Figure 3: General settings
The following table shows the available settings for this submenu:
ETS-Text
Dynamic range
[Default value]
Comment
Day/Night object
• not used
• use
• use, read after reset
Adjustment if a day/night
object shall be used and
definition of the usage after
reset
Day/Night object value = 0/
value = 1
• Day/Night
• Night/Day
Polarity of the day/night object
Presence info function
• not used
• send on day only
• send on night only
• send on day and night
Activates the notification if a
presence was detected
cyclical sending of
presence
• not used
• 5min -12h
Adjustment if the presence
shall be send cyclically
Force control release time
• not used
• 5 min – 12 h
Time which must ran out until
the detector changes tot p10-he
automatic mode again
Cyclical sending “heartbeat”
• not used
• 2min -24h
shows object for the cyclic
observation of the detector
Table 3: Dynamic range general settings
The functions are described at the following pages:
Bekijk gratis de handleiding van MDT SCN-P360D1.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-P360D1.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4454 MB |
