MDT SCN-CO2MGS.02 handleiding
Handleiding
Je bekijkt pagina 64 van 78
Technical Manual
CO2 / VOC Combi Sensor 55 [SCN-CO2MGS.02]
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
64
64
4.4.13 Diagnosis
The diagnosis function outputs the status of the controller in "plain text" and is used to quickly read
out the current device status.
Communication object 87 "Temperature controller – Diagnosis status" is used for the output.
This is permanently displayed and sends automatically with every change.
The following messages can be sent out by the diagnosis function:
Byte 0-1
Byte 3
Byte 5-11
Byte 13
Info
Heating/Cooling
Operation mode
Control value > 0%, if
„yes“: Value 1
Possible
messages
Heating: H
Comfort
Control value = 0%: 0
Cooling: C
Standby
Control value > 0%: 1
Night
Frost
Heat
ComProl –
Comfort
prolongation
active
Window -
Window contact
active
BIT –
Channel
operating mode
switching 1 Bit
PWM BYTE –
Channel
operating mode
continuous 1 Byte
Special messages
Locked
Channel is locked
Contr Flowtemp
Control value reduced by flow temperature
Contr Dewpoint
Control value reduced by dew point
Setpoint Guide
Control value reduced by outdoor temperature/reference
variable
Dew point alarm
The dew point alarm is active
Table 64: Overview – Diagnosis text
Bekijk gratis de handleiding van MDT SCN-CO2MGS.02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-CO2MGS.02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 0 MB |
