MDT BE-TAS55T4.01 handleiding
Handleiding
Je bekijkt pagina 82 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
82
82
4.9.1.2 Relative Air Humidity
The relative humidity indicates how much the air is saturated with water (%).
The following picture shows the menu for the relative humidity:
Figure 47: Settings – Relative air humidity
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Send measured value on
change
▪ not active
▪ active
Setting whether the measured value
should be sent on change
Send measured
value on change of
1 … 10 %
[1 %]
Setting at which change the measured
value should be sent.
Only visible if "Send measured value
on change" is activated
Send measurement
value cyclic
not send, 1 min – 60 min
[5 min]
Cyclic sending of the measured value
Messages
▪ not active
▪ active
Activation of the message function
Upper message value
25 … 100 %
[70 %]
Setting range of the upper/lower
message value.
Only visible when parameter
"Messages" is activated
Lower message value
0 … 75 %
[30 %]
Calibration value for
internal sensor
-20 … 20 %
[0 %]
Adjustment for internal sensor
Sensor internal/external
▪ 100% internal
▪ 90% internal/ 10% external
▪ 80% internal/ 20% external
▪ …
▪ 100% external
Setting the weighting between
internal and external sensor
Table 78: Settings – Relative air humidity
Bekijk gratis de handleiding van MDT BE-TAS55T4.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS55T4.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
