MDT BE-TAS55T4.01 handleiding
Handleiding
Je bekijkt pagina 78 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
78
78
The text entered to describe the function appears both in the menu behind the corresponding logic
and in the communication objects of the logic
The additional text is merely additional information on the logic. It is not visible anywhere else.
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Setting Logic 1-4
▪ not active
▪ And
▪ Or
▪ Send value when button
is pressed
Activates the logic function and
set the logical operation
Object type 1-4
▪ Switch
▪ Scene
▪ Value
▪ Forcible control 2 Bit
Sets the object type for sending a
value when the logic operation is
fulfilled
Scene number/
value/ forcible
control 2Bit
any value according to DPT
Setting the value which is sent
when the logic operation is
fulfilled. Only available for
object type: Scene / value /
forcible control 2Bit
Sending condition
▪ not automatic
▪ at input telegram
▪ at change output
▪ at change output
(send only 0)
▪ at change output
(send only 1)
Only for object type "Switch".
The sending condition can be
specified and a sending filter can
be set
Invert output
▪ no
▪ yes
Only for object type "Switch".
Determines whether the output
signal should be inverted or not
Table 73: Settings – Logic 1-4
The following communication objects are available:
Number
Name
Length
Usage
42
Logic – Output 1
1 Bit
2 Bit
1Byte
Output of the logic operation.
DPT depending on the parameter setting
Table 74: Communication object – Logic 1-4
If a logic operation is fulfilled, the corresponding value is transmitted.
For the "Switching" object type, a transmission condition or a transmission filter can also be defined
for the output. The logic operation can, for example, send with each input telegram, only send if the
output of the logic operation changes or only send a 1 or 0. In addition, the output can be inverted
for the switching object type and thus a 0 can be made into a 1 and a 1 into a 0
Bekijk gratis de handleiding van MDT BE-TAS55T4.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS55T4.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
