MDT BE-TAS55T4.01 handleiding
Handleiding
Je bekijkt pagina 74 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
74
74
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
LED active
▪ no
▪ yes
Activation of the LED
LED reacts to
▪ external object
▪ internal object
▪ button activation
▪ external object and
button activation
▪ internal object and
button activation
Setting how LED is to be controlled
Datapoint type
▪ 1Bit DPT 1.001 Switch
▪ 1Byte DPT 5.001
Percent (0…100%)
▪ 1Byte DPT 5.005
Decimal factor (0…255)
Parameter only available if LED
reacts to "external object".
Setting the DTP of the external
object
ON if greater than
0 – 99 %
[50 %]
Only available with the setting "1
byte Percent value".
Defines the value at which the LED
switches on
Selection of object number
any object
Parameters only available when
LED reacts to internal object.
Linked to internal object
Brightness Day (global)
level 3
(Value not changeable)
Brightness of the LED for "Day"
according to the setting in the
"Display setting" menu
Brightness Night (global)
level 1
(Value not changeable)
Brightness of the LED for "Night"
according to the setting in the
"Display setting" menu
LED display behaviour
(only for selection with "external object" and setting "1Bit Switch" or "1Byte Percent")
Color at „Day“
(value ON)
off, red, green, yellow, blue,
pink, cyan, white
Color for the object value ON /
activated button in Day mode
Color at „Day“
(value OFF)
off, red, green, yellow, blue,
pink, cyan, white
Color for the object value ON /
non-activated button in Day mode
Behavior at „Day“
(value ON)
▪ permanent
▪ blinking
Setting the lighting behavior when
LED has the object value ON or the
key is pressed
Color at „Night“
(value ON)
off, red, green, yellow, blue,
pink, cyan, white
Color for the object value ON /
activated button in Night mode
Color at „Night“
(value OFF)
off, red, green, yellow, blue,
pink, cyan, white
Color for the object value OFF /
non-activated button in Night
mode
Behavior at „Night“
(value ON)
▪ permanent
▪ blinking
Setting the lighting behavior when
LED has the object value ON or the
key is pressed
Table 69: Settings – LED 1-4
Bekijk gratis de handleiding van MDT BE-TAS55T4.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS55T4.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
