MDT BE-TAS55T4.01 handleiding
Handleiding
Je bekijkt pagina 23 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
23
23
State element 1 – 4
(for Day and Night)
▪ Not active
▪ Time
▪ Date
▪ Time with Date
▪ Internal temperature
▪ Internal relative humidity
▪ Dew point temperature
▪ State value 1
▪ State value 2
▪ State value 3
▪ State text 1 (over object 66)
▪ State text 2 (over object 67)
"Not active" only for status
element 2 - 4!
"Internal temperature", "internal
relative humidity", "dew point
temperature" only for BE-
TASxxT.01.
Description of the possible number
of status elements, see explanation
below * State elements
Standby display Night
▪ No standby
▪ Standby in upper keypad,
LEDs active
▪ Standby on full screen, LEDs
active
▪ Behaviour like Day
▪ Display off, LEDs off
▪ Display off, LEDs active
Setting the display behavior of the
information screen in night mode;
When set to "Behavior like Day"
the settings are accepted by day
mode and there are no settings for
the standby mode
Action at push button if
display is disabled
▪ Standby is exited
▪ Standby is displayed
Setting the behavior when a key is
pressed when the display is off
(e.g. via presence object)
Action at push button if
standby is active
▪ Function is not executed
▪ Funktion is executed
Setting whether the key function is
to be executed with the first key
press while being in standby
Table 11: Basic Settings – Info display
* State elements
The possible number of status elements depends on the following settings:
With "individually in change" up to 4 status elements can be activated, which are switched
according to the setting "Standby display change after".
With "in 1 or 2 lines without change", only one or two status elements can be displayed,
depending on the setting "Standby display".
If the parameter "Standby in upper keypad, LEDs active" is selected here, only one status
element is possible. The following info text appears:
If the parameter "Standby on full screen, LEDs active" is selected here, a status element can be
activated for line 1 and line 2.
Please note:
Time and date are reset to default values "00:00" and "01.01.20 Wed" after bus voltage failure and
subsequent return.
Bekijk gratis de handleiding van MDT BE-TAS55T4.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS55T4.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
