MDT BE-TAS5504.01 handleiding
Handleiding
Je bekijkt pagina 70 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
70
70
Presentation:
Single-button function
Two-button function
Hue, Saturation and Value are each represented by a special symbol. The current status is evaluated
by the push button and the current position is displayed with an arrow on the respective special
symbol.
The 3 special symbols are shown below:
ETS-Text
Symbol
Comment
Hue
Saturation
Color of the symbol
can be switched
between red, green,
blue
Value
Table 61: Special symbols – HSV color control
4.6.13 Color temperature (Tunable White)
Single-Button function
Two-Button function
With the Tunable White function the color temperature can be controlled in compatible KNX
dimmers and its status can be displayed.
The following figure shows the available settings (here for the two-button function):
Figure 38: Settings – Color temperature (Tunable White)
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Datapoint type for state
object
▪ Bar for color temperature,
state in %
▪ Bar for color temperature,
state in Kelvin
Setting the datapoint type for
the state; If the state is output in
Kelvin, this is scaled from 2700K
(= 0%) to 6000K (= 100%)
Table 62: Settings – Color temperature (Tunable White)
With color temperature (Tunable White), the light temperature can be controlled. A 4 bit dimming
command is available for the control. This allows a cycle through the color temperature. It is a start-
stop dimming that means as soon as the dimming function becomes active the control loop runs
through the entire range. The dimming process ends either when the lower or upper end is reached
or when the push button is released again. A stop telegram is sent with the release.
Bekijk gratis de handleiding van MDT BE-TAS5504.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS5504.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
