MB Quart MBTAC-STG6A-20-23 handleiding

35 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 29 van 35
Page 29 of 35
Amplier Installation
● On the middle seat bracket
remove the back driver side bolt
using a 12mm ratchet. Then
insert the ground wire ring
terminal on the power harness
and reinstall the bolt with the
12mm ratchet.
● Unclip the locking retainer on the
power connector by carefully lifting
the release tabs on both sides of
the connector.
● Slide the power wire into the open
cavity till it is fully seated. Then
insert the locking retainer back on
the connector.
● Connect blue remote wire from the
front of the vehicle to the power
harness at the bullet connectors.

Bekijk gratis de handleiding van MB Quart MBTAC-STG6A-20-23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMB Quart
ModelMBTAC-STG6A-20-23
CategorieNiet gecategoriseerd
TaalNederlands
Grootte33651 MB