MB Quart MBTAC-STG6A-20-23 handleiding
Handleiding
Je bekijkt pagina 28 van 35
Harnessing Installation (Factory Amp Integration)
● If your vehicle is equipped
with the factory amplier and
subwoofer. You will need to
unbolt the enclosure using a
10mm ratchet.
● Then pass the RCAs and remote
turn on wire behind the enclosure
toward the driver side.
● Connect the short pig tail harness
to the OEM amplier T-harness.
● Connect the T-harness in between
the appropriate harnesses on the
OEM amplier.
● Then pass this harness behind
the subwoofer enclosure toward
the driver side. You can now
resecure the enclosure and
reinstall the passenger side rear
panel.
Note
If you are planning on installing
the MB Quart Tacoma subwoofer
enclosure, please reference the
install manual now.
Page 28 of 35
Bekijk gratis de handleiding van MB Quart MBTAC-STG6A-20-23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MB Quart |
| Model | MBTAC-STG6A-20-23 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33651 MB |
