Maxview Roam Basecamp BASE/50 handleiding
Handleiding
Je bekijkt pagina 5 van 40
1. Firstly remove the 14 screws on the rear of the
antenna enclosure using a Phillips screwdriver.
You can either leave the router inside the
antenna enclosure, or remove for easier access.
If you choose to remove the router, please see
page 6 for details on how to do so.
Inserting a SIM Card
5
4. Insert the SIM tray back into the router. The metal chip should still be facing upwards and the SIM text on
the front of the tray should be the correct way up. The tray should push into the slot without resistance, until it
is fully inserted.
The SIM is now inserted.
!
Slot
3. Remove the SIM tray and lay the standard size SIM card flat with the metal chip face facing up. Ensure it is in
the correct orientation and sitting completely flat in the holder.
You can convert a Micro or Nano SIM Card to the standard size using the SIM Card Adaptor Pack included.
✓
✓
✶
✓
✶
Nano
Micro
Standard
✶
2. Use pin to firmly press on SIM eject button. This is
located next to the SIM slot. It is not necessary to
apply force to the SIM tray itself. This may damage
the router.
Bekijk gratis de handleiding van Maxview Roam Basecamp BASE/50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Maxview |
| Model | Roam Basecamp BASE/50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8884 MB |
