Master-Bilt QS2 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104/ 104

Afdrukken

Je bekijkt pagina 13 van 104

13

8/22 Rev. R 132617 ©2022 Refrigerated Solutions Group. All rights reserved.

WALK-IN INSTALLATION

Place the second panel in position next to the first floor panel but

DO NOT LOCK!

Shim the second panel, where necessary, using the same procedure

as was used on the first panel. When all four edges of the second

floor panel are properly shimmed, lock the two panels securely

together. Using the same technique for leveling, check the levelness

of the two sections in all directions by placing the level across the

joint at several points and, again, check the levelness of the floor

panels in the direction of the panel joint.

Refer to the construction diagram and install the remainder of the

floor panels using the same procedure as was used for the first and

second floor panels. When all the floor panels are installed and

leveled perfectly, check the section latches for full and complete

locking.

Trim excess vapor barrier.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104/ 104

Bekijk gratis de handleiding van Master-Bilt QS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Koelkast