Martin VC-Grid 15 handleiding
Handleiding
Je bekijkt pagina 17 van 32
System installation 17
To create a DMX-controlled installation that draws DC power from the Martin IP66 PSU 240W:
1. See Figure 6 on page 16 for an overview of this type of installation
2. Make sure that no devices in the installation can be connected to AC mains power until all installation
work is complete.
3. Read “Safety Information” on page 4 and “Precautions to avoid damage” on page 7.
4. Connect VC-Grids together in daisy-chains using Martin hybrid PCB-to-PCB cables (see ”VC-Grid to
VC-Grid link cables” on page 30). Connect each cable from the THRU connector on one VC-Grid to the
IN connector on the next VC-Grid.
Warning! Do not exceed the maximum permitted number of modules per chain given in Table 2 on
page 5.
5. See Figure 7. Connect a Martin hybrid-to-PCB adapter cable (P/N 91616035) to the first VC-Grid of
each chain.
6. If necessary, you can extend the hybrid link by connecting a Martin 4-pin XLR hybrid extension cable to
the Hybrid-to-PCB adapter cable. Suitable extension cables are available from Martin in various lengths.
See ”Extension cables” on page 30.
7. See Figure 7. Connect the DC power input connector of a Martin IP66 PSU 240W hybrid lead-in cable
(P/N 91616039) to the DC output on the IP66 PSU 240W.
8. Connect the 4-pin female XLR connector on the hybrid lead-in cable to the 4-pin male connector on the
hybrid-to-PCB adapter cable (or on the hybrid extension cable, if you have extended the hybrid link).
9. Connect the 5-pin male XLR connector on the hybrid lead-in cable to a DMX link that carries a DMX
signal from an RDM-compliant DMX controller.
10. Install a mains power cable on the Martin IP66 PSU 240W and connect it to AC mains power.
11. Apply AC mains power to the DMX controller.
You can now configure the system. See ”System setup”on page 21.
Figure 7: Martin IP66 PSU 240W and DMX connections to a VC-Grid chain
DC power from
To VC-Grid
Hybrid lead-in cable, Martin IP66 PSU 240W, P/N 91616039
chain
5-pin male XLR 4-pin female XLR
4-pin male XLR PCB connector
Hybrid-to-PCB adapter cable, P/N 91616035
Martin IP66 240W PSU
DMX from DMX/RDM
controller
Insert 4-pin XLR hybrid
extension cable here if you
need to extend the cable run
Bekijk gratis de handleiding van Martin VC-Grid 15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | VC-Grid 15 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1816 MB |
