Martin Exterior Dot-9 Pro handleiding
Handleiding
Je bekijkt pagina 7 van 66
Martin
®
Exterior Dot 1/4/9
Pro User Manual Rev. A 7
Connections using an Exterior DC-Feeder
To use a Martin Exterior DC-Feeder to supply Exterior Dot-1/4/9 Pro devices with 15 VDC power and
data:
1. See illustration above and see the Exterior DC-Feeder user manual supplied with the DC-Feeder
and available for download from the Martin website at www.martin.com.
3. Connect the DC-Feeder to 48 VDC mains power and to a P3/Art-Net/sACN data signal from
either:
• a Martin P3 PowerPort via a DCE hybrid cable, or
• a Martin DCE PSU 240 IP via a Y-shaped DCE hybrid adapter cable, or
• a suitable generic external PSU via a Y-shaped DCE hybrid adapter cable.
4. Connect the string of Exterior Dot-1/4/9 Pro Dots to the output from the DC-Feeder. It is possible
to split the string into two using a Y-shaped adapter cable available from Martin. Whether you
connect one single string or a string that is split into two, there is a limit to the number of Dots you
can connect to the output from one Exterior DC-Feeder – refer to the DC-Feeder Safety and
Installation Manual to ensure you do not exceed the number of Dots allowed.
Bekijk gratis de handleiding van Martin Exterior Dot-9 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | Exterior Dot-9 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7563 MB |
