Martin Audio LE200 handleiding
Handleiding
Je bekijkt pagina 7 van 20
LE100/LE200 User Guide V1.0
7
LE100/LE200 USER GUIDE
CONNECTIONS
LE Series monitors are fitted with low-profile, NL4-type four-pin push-lock connectors, rated
at 30 A. All the connectors (five on the LE100, four on the LE200) are wired in parallel: use
whichever connector(s) suit the stage cabling layout. The multiple connectors permit simple
interconnection between monitors on the same circuit; they can be used to “daisy-chain” the
amplifier output to the next speaker.
Important: please ensure that the total impedance of multiple LE Series monitors connected in
this way is not less than the minimum load impedance the amplifier channel can drive:
No. of monitors Total impedance
1 8 ohms
2 4 ohms
3 2.7 ohms
4 2 ohms
Wire the mating connectors according to the following pinout table:
Pin LE100 LE200
Passive x-over Bi-amped
1+
Input ‘+’ Input ‘+’ LF input ‘+’
1-
Input ‘-‘ Input ‘-‘ LF input ‘-‘
2+
(not used) (no connection) HF input ‘+’
2-
(not used) (no connection) HF input ‘-‘
Note that as pins 2+ and 2- are unused on the LE100, standard four-core speaker cables
terminated in NL4s may be used without a problem. However, note that all four pins on each
connector - including those that are unused by the speaker itself - are wired in parallel to all
other connectors on the cabinet.
Bekijk gratis de handleiding van Martin Audio LE200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | LE200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3331 MB |
