Martin Audio Engineer Remote handleiding
Handleiding
Je bekijkt pagina 74 van 80
Engineer 418 & 818 User Manual Page 74
Preset and Zone Communication Protocol
Introduction
As mentioned previously, the Engineer 418 and 818 can form part of a more complex system controlled via
either the RS232 port on the front or the RS485 port on the rear of the device, taking the place of the Engineer
remote. Systems such as AMX and Crestron can be programmed to control the same functions as the Engineer
remote; recalling presets, selecting zones and adjusting the zone volumes. This chapter describes a part of the
communications protocol used on the Martin Audio 418 and 818 v1.0.
Implementation of this protocol should only be done by professional installation engineers. Improper use can
result in device instability or, ultimately, device crashes. In this case, the firmware will have to be flashed
which will result in the loss of the project stored in the Engineer.
For this reason, it's recommended to backup your data before trying your protocol implementation. You can
do this from the Engineer control software, using a full downsync. Save the result to a file. If anything goes
wrong, try uploading this file into the device. For more information, please consult the official Engineer
software manual.
Connecting to the Engineer
The protocol described in this document can be used for both the RS232 (front) and RS485 (back) connections
on the device. Communication with the device is established with the following settings:
Baud rate: 19200
Data bits: 8
Parity: None
Stop bits: 1
Handshaking: RTS during send
Note that the RTS pin should be set to “on” a few milliseconds prior to the actual communication. Always
reset this pin to “off” when communication isn't taking place!
Bekijk gratis de handleiding van Martin Audio Engineer Remote, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | Engineer Remote |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11493 MB |
