Martin Audio Blackline Q218 handleiding

38 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 38
is square. The grub screw needs to be at the bottom
and the sideways notch at the top.
Make sure you use wall fixings that are appropriate for
the wall material and the weight of the speaker.
Wall section mounting hole specifications:
Q8, Q26 and Q44: wall section has four holes with
a diameter of 7 mm (0.28 in).
Q10 and Q12: wall section has four holes with a
diameter of 9 mm (0.35 in).
Q15: wall section has six holes with a diameter of
11 mm (0.43 in).
5. If you are installing in landscape, rotate the
horn (page 11).
6. Remove (and keep) four screws from the rear of the
cabinet.
For Q8, Q26 and Q44, use a 4mm hex key.
For Q10, Q12 and Q15, use a 5mm hex key.
For Q8, Q10, Q12 and Q15, there are six wall bracket
screws:
For portrait, remove the lower four screws, as this
will allow you more downwards tilt of the speaker.
For landscape, remove the four screws in the
middle of the cabinet.
For Q26 and Q44, there are only four screws, so there
is no choice of which screws to remove.
7. Attach the cabinet section of the bracket (the square
section) using the same screws. Make sure that the
bolt is horizontal.
8. Lift the speaker up to the bracket and hook the
horizontal bolt into the notch of the wall section.
The bracket will now hold the speaker in place.
When working at height, you must
use appropriate safety measures.
A scaffold tower or lifting platform
will allow you to use both hands
safely.
9. Replace the lower fastening. Depending on your
bracket, this is either a pin or a bolt.
10. Fix the pin or bolt in place, with either the washer and
R-clip or the nut.
11. Loosen the vertical bolt (using an M5 hex key) and
adjust the speaker horizontally on this bolt.
12. Loosen the upper horizontal bolt.
13. Adjust the vertical position using the grub screw.
14. Connect the loudspeaker cable (page 10).
15. Check the coverage using an audio source and
make final adjustments to the vertical and horizontal
positions.
16. When you have found the best position, tighten the
vertical and horizontal bolts.
BlacklineQ User Guide
13

Bekijk gratis de handleiding van Martin Audio Blackline Q218, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMartin Audio
ModelBlackline Q218
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4802 MB