Marshall CV730-ND3 handleiding
Handleiding
Je bekijkt pagina 6 van 22
9 10
CV730-ND3/N D3W
www.marshall-usa.com
www.marshall-usa.com
Projector
Computer
1.5 metersh
3.3.2.3 Precautions for installation
1. Before installation, please conrm the orientation of the machine relative to the object
to be captured
2. It is recommended that the machine should be set at a distance of more than 2 meter
away from the object to be captured. Please adjust for a best distance according to the
magnication of the lens
3. The machine (including metal plates) is weighed at
about 4 kg. If it is to be installed on the ceiling, please use
the hanger that has obtained UL security approval
to prevent the machine from falling down.
4. Please check whether the camera is installed securely
on a regular basis.
5. Please clean the cooling fan located at the bottom to
ensure the good heat dissipation effect of the machine
on a regular basis.
3.3.2.4 Installation steps
1. Remove the 4 foot pads on the machine base. The foot
pads are designed to be detachable and can be removed
by rotating them counterclockwise by hand.
<Remark> The removed foot pads must be kept properly
for future use.
• Metal plate B - ceiling side
Metal plate B - ceiling side
Metal plate B
locking screw
Metal plate B
locking bolt
Bekijk gratis de handleiding van Marshall CV730-ND3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marshall |
| Model | CV730-ND3 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 12367 MB |
