Marshall CV630-BI handleiding
Handleiding
Je bekijkt pagina 13 van 24
www.marshall -usa.com
23 24
CV630-BI/WI/ND3/ND3W
User Manual
1st Level
Major
Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Zoom tracking
Manual / Curve
Tracing / Zoom
Tracking
It can be set in the Manual Focus
(MF) mode
The focus mode during lens
zooming
PTZ Assist
On / Off
Check whether auto focus is
enabled if there is any changes of
PTZ (can be set in “Manual”)
<Remark> When PTZ Assist is
enabled and PTZ control is in
operation, the focus will be
triggered. The focus will not be
triggered when the scene
changes
Preset AF
On / Off
Set whether to perform Auto
Focus after Preset
SMART AF
On / Off
Turn on this function and AF will
mainly focus on the face
Ethernet
DHCP On / Off
Enable/Disable DHCP setting
using left and right arrow keys
and press [ENTER] to apply
setting.
IP Address 192.168.100.100
Press [ENTER] to be in modify
mode; select the item to be
modified using the up and down
keys and modify the value using
the left and right keys or the
numeric keys.
Subnet mask 255.255.255.0
Press [ENTER] to be in modify
mode; select the item to be
modified using the up and down
keys and modify the value using
the left and right keys or the
numeric keys.
Gateway 192.168.100.254
Press [ENTER] to be in modify
mode; select the item to be
modified using the up and down
keys and modify the value using
the left and right keys or the
numeric keys.
Audio
Audio In Line In/Mic In Set Audio In
Audio Enable
On / Off
Turn on/off audio output
Audio Volume
0~C~10
Audio Volume Setting
1st Level
Major
Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Audio Delay
On / Off
When the audio is not
synchronized with the video,
enable this function to set the
audio delay time
<Remark> Supported when NDI|HX
function setting is off
Audio Delay
Time(ms)
-1~-500ms
Set audio delay time
<Remark> Supported when NDI|HX
function setting is off
Encode Type
AAC/ G.711
Set audio encode type
<Remark> Supported when NDI|HX
function setting is off
Encode Sample
Rate
1. 48 KHz(AAC)
2. 44.1 KHz(AAC)
3. 16 KHz(AAC)
4. 16 KHz(G.711)
5. 8 KHz(G.711)
Set the encode type and sample
rate
<Remark> Supported when NDI|HX
function setting is off
System
Prompt
On / Off
Turn on/off the prompt information
on the display
IR Receive
On / Off
Tally Lamp
On / Off
Tally CMMD
Mode
General / Link
Set whether the indicator light is
linked with RS232 command
General (Not linked): The
indicator light switch and mode
shall be set separately.
When the indicator light is
on, and the default mode is
off, additional command is
required to set the indicator
light mode
Setting the indicator light
mode when the indicator light
is off will not trigger the
indicator light
Link:
When the indicator light is
on, the default mode is red
light
Setting the indicator light
mode when the indicator light
is off will turn on the indicator
light
Language
English / Chinese
Initial Position
Last MEM / 1
st
Preset
Select the camera lens to return
to the last memory position or the
1st Preset position after POWER
ON
<Remark> 1st Preset = Preset 0
Control Device
Encoder /
Controller
Control Device setting,
Controller: for joystick
Encoder: for tracking system
Bekijk gratis de handleiding van Marshall CV630-BI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marshall |
| Model | CV630-BI |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9948 MB |
