Marantz RHA6 handleiding
Handleiding
Je bekijkt pagina 4 van 28
4
Setup
1. Switch everything on in the following order:
• audio input sources (i.e. instruments, CD/MP3 players)
• RHA6
• speakers/amps
2. When turning off, always reverse this operation:
• speakers/amps
• RHA6
• last, any input sources
Using the Main Input Connectors
1. Connect your source to the rear panel main input connectors on RHA6.
2. Set the input gain (Main section) and the balance control (Channel section) on center position. Set the
output gain of each channel all the way down.
3. Check the input level meter for optimal signal.
4. Connect headphones to RHA6 and start to raise the output gain of each channel to the desired
listening volume.
Using the Aux Inputs
You can also play back a signal to feed in a vocal microphone and then connect a mixer’s Aux send to
RHA6’s Aux input. Use the balance control to give the vocalist the desired mix between the voice and the
playback signal. Then, adjust the output gain control to regulate the overall desired volume.
Main
Outputs
Main
Outputs
Aux Send
Bekijk gratis de handleiding van Marantz RHA6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marantz |
| Model | RHA6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3418 MB |
