Makita UN001G handleiding
Handleiding
Je bekijkt pagina 17 van 136
17 ENGLISH
Speed adjusting
Youcanadjustthetoolspeedbypressingthemain
powerbutton.Eachtimeyoupressthemainpower
button, the level of speed changes.
►Fig.7: 1. Main power button 2. Speed indicator
Indicator Mode Stroke speed
High 4,000 min
-1
Medium 3,000 min
-1
Low 2,000 min
-1
NOTE: The tool starts in the same mode as the last
operation.Ifyouremovethebatterywhilethemotor
isrunningaftertheshutdown,thetoolmaynotstartin
the same mode as the last operation.
Reverse button for debris removal
WARNING: If the entangled branches or
debris cannot be removed by the reverse func-
tion, switch o the tool and remove the battery
cartridge, and then remove the entangled
branches or debris using tools such as pliers.
Failuretoswitchothetoolandremovethebat-
terycartridgemayresultinseriouspersonalinjury
from accidental start-up. Removing the entangled
branchesordebrisbyhandmaycauseaninjury,
sincetheshearbladesmaymoveinreactionto
removing them.
This tool has a reverse button to change the direction
ofshearbladesmovement.Itisonlyforremoving
branches and debris entangled in the tool.
To reverse the shear blades movement, press the
reverse button when the shear blades have stopped,
andthenpulltheswitchleverwhilepressingthelock-o
lever. The speed indicator starts blinking, and the shear
blades move in reverse direction.
When entangled branches and debris are removed,
the tool returns to the regular movement and the speed
indicator stops blinking and lights up.
►Fig.8: 1. Reverse button 2. Speed indicator
NOTE: If the entangled branches or debris cannot
be removed, release the switch lever, then press the
reverse button, and then pull the switch lever until
theyareremoved.
NOTE:Ifyoupressthereversebuttonwhiletheshear
blades are still moving, the tool comes to stop and to
bereadyforreversemovement.
Adjusting the cutting angle
CAUTION: Always be sure that the tool is
switched o before folding or unfolding the head.
CAUTION: When folding the head for carrying
the tool or after using the tool, be sure to attach
the blade cover before folding the head.
CAUTION: When folding the head, be careful
not to pinch your ngers between the head and
the slide sleeve.
Theangleoftheheadcanbeadjustedin6stepsat
between 45° upward and 70° downward. To change the
angle of the head, follow the steps below.
►Fig.9: 1. Upward head angles 2. Downward head
angles
1. Hold the head and the slide sleeve as shown in
thegure.
►Fig.10: 1. Head 2. Slide sleeve
2. Move the head while holding down the slide
sleeve, and then release the slide sleeve.
3. Movetheheadslightlyuntilitislockedwithaclick.
NOTE:Makesurethattheheadissecurelylocked
before operating the tool.
Electronic function
The tool is equipped with the electronic functions for
easyoperation.
• Constant speed control
The speed control function provides the constant
rotation speed regardless of load conditions.
• Electric brake
This tool is equipped with an electric brake. If the
toolconsistentlyfailstostoptheshearblades
quicklyaftertheswitchleverisreleased,havethe
tool serviced at Makita Authorized Service Center.
• Accidental re-start preventive function
Whenyouturnonthetoolwhilepullingtheswitch
lever, the tool does not start and the caution lamp
blinksingreen.Tostartthetool,rstreleasethe
switch lever and then turn on the tool.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched o and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION: When replacing the shear blades,
always wear gloves so that your hands do not
directly contact the blades.
Installing or removing the shear
blades
CAUTION: Attach the blade cover before
removing or installing the shear blades.
Bekijk gratis de handleiding van Makita UN001G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | UN001G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20253 MB |
