Makita TW003G handleiding
Handleiding
Je bekijkt pagina 10 van 88
10 ENGLISH
Auto-stop mode
Auto-stop mode helps for good control when driving bolts.
Thismodehas3steps.Italsoworksdierentlyforclockwiseandcounterclockwiserotation.
Main purpose
• Clockwise: Reduce the risk of breakage of bolts/nuts due to overtightening.
• Counterclockwise:Preventaboltfromfallingo.Whenlooseningabolt,thetoolautomaticallystopsorslows
down after the bolt/nut has been loosened enough.
Thetypeoftheauto-stopmodechangeseverytimeyoupressthebutton
.
NOTE:Thetimingtostopthedrivingvariesdependingonthetypeofthebolt/nutandmaterialtobedriven.Makea
test driving before using this mode.
NOTE:Thismodeworksonlywhentheswitchtriggerisfullypulled.
NOTE: The impact force is the same as impact mode 4 in auto-stop mode.
►Fig.8
Auto-stop mode
(Auto-stop mode displayed
on panel)
Feature
Clockwise Counterclockwise
1
Thetoolstopsautomaticallyassoonasthetoolhas
started impact blows.
Thismodehelpstorepeatscrewdrivingcontinuouslywith
equal torque. This mode also helps to reduce the risk of
breakage of bolts/nuts due to overtightening.
Thetoolstopsautomaticallyassoon
as it has stopped impact blows.
2
Thetoolstopsautomaticallyapproximately0.5second
later from the moment that the tool has started impact
blows.
Thetoolstopsautomaticallyapprox-
imately0.2secondlaterfromthe
moment that the tool has stopped
impact blows.
3
Thetoolstopsautomaticallyapproximately1secondlater
from the moment that the tool has started impact blows.
The tool slows down the rotation after
the tool has stopped impact blows.
: The lamp is on.
Full speed mode
When full speed mode is turned on, the tool speed
becomes fastest of the selected operation mode even if
youdonotpulltheswitchtriggerfully.Whenfullspeed
modeisturnedo,thetoolspeedincreasesasyou
increase the pressure on the switch trigger.
To turn on full speed mode, press and hold the but-
ton .Toturnofullspeedmode,pressandholdthe
button again.
The lamp turns on while full speed mode is on.
►Fig.9: 1. Button 2. Lamp
NOTE: Full speed mode continues even after switch-
ing the operation mode.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched o and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Alwaysusethecorrectsizeimpactsocketforboltsand
nuts. An incorrect size impact socket will result in inac-
curate and inconsistent fastening torque and/or damage
to the bolt or nut.
Installing or removing impact socket
CAUTION: Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
CAUTION: After inserting the impact socket,
make sure that it is rmly secured. If it comes out,
do not use it.
Tool with the ring spring
For impact socket with O-ring and pin
Only for model TW001G
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the impact
socket onto the square drive so that the hole in the impact
socket is aligned with the hole in the square drive.
Insert the pin through the hole in the impact socket
and square drive. Then return the O-ring to the original
Bekijk gratis de handleiding van Makita TW003G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | TW003G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13299 MB |
