Makita TM001G handleiding
Handleiding
Je bekijkt pagina 11 van 76
11 ENGLISH
NOTE: Before cutting operation, it is recommended to
preset the oscillation rate 4 - 6.
NOTE:Anadequatemovementspeedofthetool
makessawdustejectedsmoothly.Ithelpsecient
operation.
NOTE: The round saw is recommended for cutting
long straight line.
Sanding
NOTICE: Do not reuse a sanding paper used for
sanding metal to sand wood.
NOTICE: Do not use a worn sanding paper or
sanding paper without grit.
Applyasandingpaperontheworkpiece.
►Fig.12
NOTE: Before the operation, it is recommended to
determineasuitableoscillationratebysandingatest
material sample as trial.
NOTE: It is recommended not to change the grid of
thesandingpaperuntilyounishsandingthewhole
surface of the workpiece. Changing the grid of the
sandingpaperonthehalfwaymaycauseanunne
nish.
Dust attachment for sanding
operation
Optional accessory
CAUTION: Do not use the dust extraction
attachment when sanding metal. Sucking spark
and hot particle results in smoking and ignition.
Installing the dust attachment
1. Removetheholderboltandtheapplicationtool.
2. Putthedustattachmentwiththelatchesaligned
with the notches on the tool.
Slide the dust attachment as shown in the illustration.
►Fig.13: 1. Dust attachment 2. Latch 3. Notch
3. Installthesandingpadandtheholderbolt.
4. Connect the hose of the vacuum cleaner to the
dust extraction attachment.
►Fig.14
Removing the dust attachment
1. Whenremovingthedustattachment,removethe
holderboltandthesandingpad.
2. Slide the dust attachment while opening the
latchesbyhandsasshownintheillustration,andthen
remove the dust attachment from the tool.
►Fig.15: 1. Latch
MAINTENANCE
CAUTION: Always be sure that the tool is
switched o and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers,alwaysusingMakitareplacementparts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
Ifyouneedanyassistanceformoredetailsregard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Segmentsawblade
• Roundsawblade
• Plungecutsawblade
• Scraper (rigid)
• Scraper(exible)
• Serratedsegblade
• Generaljointcutter
• HM remover
• HMsegsawblade
• HM sanding plate
• Diamondsegsawblade
• Sanding pad
• Abrasivepaperdelta(red/white/black)
• Fleece delta (medium / coarse / without grit)
• Polishingfeltdelta
• Dust extraction attachment
• Makitagenuinebatteryandcharger
NOTE:Someitemsinthelistmaybeincludedinthe
toolpackageasstandardaccessories.Theymay
dierfromcountrytocountry.
Bekijk gratis de handleiding van Makita TM001G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | TM001G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12012 MB |
