Makita DDG461Z handleiding
Handleiding
Je bekijkt pagina 8 van 84
8 ENGLISH
Setting up tool
CAUTION: Always be sure that the front
handle, side handle and reaction receiver are
installed securely before operation.
NOTICE: Do not over tighten the bolts. It may
damage the tool.
Installing the side handle
Removetheboltsshowninthegurefromthetool.
Keeptheboltssothattheyarenotlost.
►Fig.2: 1. Bolt
Placethesidehandleonthetool.
Tightentheallfourboltstemporarily,andthensecurely
tightentheboltsusingthewrench.
►Fig.3: 1. Side handle 2.BoltA3. Bolt B
Installing the reaction receiver
Placethereactionreceiversothatthebarofthereac-
tion receiver comes to the left side of the operator.
Adjustthepositionofthereactionreceiversothatthe
axisofthespindleisinthecenteroftheoperator'sbody.
Fastentheboltsrmly.
►Fig.4: 1. Bar of the reaction receiver 2. Bolt C
FUNCTIONAL DESCRIPTION
CAUTION: Always be sure that the tool is
switched o and the battery cartridge is removed
before adjusting or checking function on the tool.
Indicating the remaining battery capacity
Only for battery cartridges with the indicator
►Fig.5: 1. Indicator lamps 2.Checkbutton
Pressthecheckbuttononthebatterycartridgetoindicatetheremain-
ingbatterycapacity.Theindicatorlampslightupforafewseconds.
Indicator lamps Remaining
capacity
Lighted O Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
Thebattery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambienttemperature,theindicationmaydierslightly
from the actual capacity.
NOTE:Therst(farleft)indicatorlampwillblinkwhen
thebatteryprotectionsystemworks.
Tool / battery protection system
Thetoolisequippedwithatool/batteryprotectionsys-
tem.Thissystemautomaticallycutsopowertothe
motortoextendtoolandbatterylife.Thetoolwillauto-
maticallystopduringoperationifthetoolorbatteryis
placed under one of the following conditions:
Overload protection
Whenthetool/batteryisoperatedinamannerthat
causesittodrawanabnormallyhighcurrent,thetool
stopsautomatically.Inthissituation,turnthetoolo
andstoptheapplicationthatcausedthetooltobecome
overloaded. Then turn the tool on to restart.
Overheat protection
Whenthetool/batteryisoverheated,thetoolstops
automatically.Inthissituation,letthetool/batterycool
beforeturningthetoolonagain.
Overdischarge protection
Whenthebatterycapacityisnotenough,thetoolstops
automatically.Inthiscase,removethebatteryfromthe
toolandchargethebattery.
Protections against other causes
Protectionsystemisalsodesignedforothercauses
that could damage the tool and allows the tool to stop
automatically. Take all the following steps to clear the
causes,whenthetoolhasbeenbroughttoatemporary
halt or stop in operation.
1.
Turnthetoolo,andthenturnitonagaintorestart.
2. Chargethebattery(ies)orreplaceit/themwith
rechargedbattery(ies).
3. Letthetoolandbattery(ies)cooldown.
Ifnoimprovementcanbefoundbyrestoringprotection
system, then contact your local Makita Service Center.
Main power switch
WARNING: When the tool is not in use, turn
the tool o and set the reversing switch lever in
the neutral position to lock the trigger. Always be
sure that the main power lamp goes out after you
turn the tool o.
Tostandbythetool,pressthemainpowerbuttonuntil
themainpowerlamplightsup.Toturno,pressthe
mainpowerbuttonagain.
►Fig.6: 1.Mainpowerbutton2. Main power lamp
NOTE:Thistoolemploystheautopower-ofunction.
To avoid unintentional start up, the main power switch
will automatically shut down when the switch trigger
isnotpulledforabout5minutesafterthemainpower
switch is turned on.
Bekijk gratis de handleiding van Makita DDG461Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | DDG461Z |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12858 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Blue |
| Gewicht | 6400 g |
| Breedte | 840 mm |
| Stroombron | Batterij/Accu |
| Vermogen | 1350 W |
