Makita DDG461Z handleiding
Handleiding
Je bekijkt pagina 10 van 84
10 ENGLISH
Electronic function
The tool is equipped with the following electronic func-
tions for easy operation.
Electric brake
Thistoolisequippedwithanelectricbrake.Ifthetool
consistently fails to quickly cease to function after the
switch trigger is released, have the tool serviced at a
Makita service center.
Soft start feature
Thisfunctionallowsthesmoothstart-upofthetoolby
limiting the start-up torque.
Strap hole
WARNING: Do not use the strap hole for
any other purpose than hanging the tool or than
anti-theft of the tool. Otherwisepersonalinjurymay
occur.
►Fig.12: 1. Strap hole
ASSEMBLY
Installing or removing battery
cartridge
CAUTION: Always switch o the tool before
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-
tridge rmly when installing or removing battery
cartridge.Failuretoholdthetoolandthebattery
cartridgermlymaycausethemtoslipoyourhands
andresultindamagetothetoolandbatterycartridge
andapersonalinjury.
►Fig.13: 1. Red indicator 2. Button 3. Battery
cartridge
Toremovethebatterycartridge,slideitfromthetool
whileslidingthebuttononthefrontofthecartridge.
Toinstallthebatterycartridge,alignthetongueonthe
batterycartridgewiththegrooveinthehousingandslip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
showninthegure,itisnotlockedcompletely.
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
itmayaccidentallyfalloutofthetool,causinginjuryto
you or someone around you.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
notbeinginsertedcorrectly.
Mounting auger bit
CAUTION: Always be sure that the tool is
switched o and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION: When attaching the auger bit to the
spindle, make sure that the auger pin is locked
and inspect the auger pin for any damages.
CAUTION: When carrying the tool, remove
the auger bit from the tool.
Mounting auger bit on spindle
NOTE:Theshapeandmechanismoftheaugerbit
and the auger pin may vary depending on your auger
bit.
Aligntheholeonthespindlewiththeholeontheauger
bit.
Puttheaugerbitontothespindle.
►Fig.14: 1.Augerbit2. Spindle
Fixtheaugerbitwiththeaugerpinandthesafetylock.
►Fig.15: 1.Augerpin2. Safety lock
OPERATION
CAUTION: This is a powerful tool which gen-
erates high torque. It is important that the tool is
securely held and properly braced.
CAUTION: Before operating, check that there
is no foreign matter (sand, dirt, etc.) stuck in the
openings or moving parts.
Work posture
Maintaining proper operating position is one of the
mostimportantandeectiveproceduresforcontrolling
kickback.
Keepproperpositioningbypracticingthefollowing
points.
• Positionthetoolsothatthebarofthereaction
receiver always contacts on the left side of your
waist.
• Graspthehandleandthesidehandlewithboth
hands.Wrapyourngersaroundthegripping
areas, keeping the gripping areas cradled
betweenyourthumbsandforengers.
• Keepyourbackasverticalaspossiblebybending
the legs as required during the digging process.
• Stay alert to the torque reaction force of the tool.
Alwayskeeptheoperatingpositionthatyoucan
withstand the torque reaction force.
►Fig.16: 1. Handle 2. Side handle 3. Bar of the reac-
tion receiver
WARNING: Avoid improper positioning. Do
not stand too far from the tool.Properreactionand
controlmaynotbeachievedintheeventofkickback.
►Fig.17
Bekijk gratis de handleiding van Makita DDG461Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | DDG461Z |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12858 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Blue |
| Gewicht | 6400 g |
| Breedte | 840 mm |
| Stroombron | Batterij/Accu |
| Vermogen | 1350 W |
