Mahlkönig E80S handleiding
Handleiding
Je bekijkt pagina 19 van 44
Seng up the portalter support and spout
You will need a at-head screwdriver to adjust the portalter
support (not included in the scope of delivery).
Adjust the portalter support (10) to the size of your espresso machine’s
portalter (see Fig. C):
1. Make sure that the grinder is switched o (On/O switch (5) to posion
“0”).
2. Turn anclockwise using a at-head screwdriver to loosen the screws (8)
for adjusng the portalter support (le and right).
The portalter support is lowered as far as it will go.
3. Insert the portalter into the portalter support (12).
4. Push the portalter support upwards unl the portalter ts exactly
between the portalter support and the portalter intake.
If the portalter support does not t, contact your supplier (see
chapter “Maintenance and service”).
5. Hold the portalter support in posion and x it by turning the screws
for adjusng the portalter support (le and right) clockwise unl ght
using a at-head screwdriver.
6. Push the spout guide (19) up or down in the lock to align the spout (13)
in the opmal posion for your portalter (see Fig. E).
Align the spout so that the ground coee falls from the spout into the
centre of the portalter.
19
E80S | ENESPRESSO GRINDER
18
Bekijk gratis de handleiding van Mahlkönig E80S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E80S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4464 MB |
