Mahlkönig E80S handleiding
Handleiding
Je bekijkt pagina 18 van 44
Please note that the grinder is subject to an extensive funconal
test before delivery and may therefore sll contain coee pow-
der residue.
Seng up the grinder and inserng the bean hopper
You will need a at-head screwdriver (not supplied) for xing the
bean hopper.
1. Place the grinder on a level, stable surface that does not shake or wob-
ble.
2. Make sure that the spout (13) is pushed up as far as possible and is se-
curely locked into the spout locking mechanism (see Fig. D).
3. Make sure that the grinder is switched o (On/O switch (5) to “0”) and
connect the grinder to the power supply by inserng the power plug into
a properly installed safety socket.
4. Place the collecng tray (9) into the corresponding recess in the casing
under the spout.
5. Place the bean hopper (1) onto the bean hopper intake (2).
When placing the bean hopper on, make sure that you place the nose
of the bean hopper into the corresponding recess in the bean hopper
intake.
6. Push the bean hopper down into the bean hopper intake and turn the
bean hopper clockwise to x it to the grinder.
If the bean hopper cannot be xed in place by turning it, it may not be
posioned correctly. In this case, align the bean hopper correctly (see
step 5) and then try again by pressing it down and turning it (see also the
“Troubleshoong” chapter).
The grinder automacally switches o if the bean hopper is not
aached.
E80S | ENESPRESSO GRINDER
18
Bekijk gratis de handleiding van Mahlkönig E80S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E80S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4464 MB |
