Magewell USB Capture 4K Plus handleiding

39 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 15 van 39
Check for updates
Updating the Firmware
When the firmware is successfully updated by USB Capture Utility V3, users need to reconnect the
device to make it take effect. The update procedure is the same for different models. Here is an
example of how to update the firmware of USB Capture HDMI Plus.
Prerequisites
Precautions
Procedures
1. If there is a new version available, go to the next step.
2. If detection failed, please retry.
3. If it is the latest version, no action is needed.
In the following cases, the device will automatically detect whether there is a new firmware
version available.
Make sure the Internet connection is available and stable.
Make sure the device is recognized correctly by the USB Capture Utility V3.
Make sure the firmware version is not lower than 2.6.6907.
Running USBCaptureUpdate.exe is strictly prohibited during update, because the update will fail.
Unplugging the device is strictly prohibited during update, because it may cause damage to the
device.
It is recommended not to operate device or computer during update, may cause update failed.
Video capture is not allowed during firmware update of the device.
Check Firmware version in the Info tab, click the button to check for updates.Step 1.
Once an hour every during 0:00 to 5:00.
Each time the device is connected.
Each time the device is switched to in Utility V3.
(Optional) Click the button to check Release Notes.Step 2.
15

Bekijk gratis de handleiding van Magewell USB Capture 4K Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMagewell
ModelUSB Capture 4K Plus
CategorieNiet gecategoriseerd
TaalNederlands
Grootte8369 MB

Caratteristiche Prodotto

Kleur van het productZilver
Breedte98.1 mm
Diepte12.3 mm
Hoogte17 mm
LED-indicatorenJa