Maestro MR-320C handleiding
Handleiding
Je bekijkt pagina 6 van 44
6
NOTE:
*At temperature dot , it can not select steam control. *At temperature dot , it
can only select steam control “ ” . * It takes about 40’ for heating process, afterthat,it
is fully ready to iron.
It is normal to hear a pumping sound as the water is pumped into the steam station.
Do not use temperatures higher than those indicated on the garments to be treated.
Temperature for synthetic bres (Polyester,Nylon...)
Temperature for silk, wool.
Temperature for cotton & linen.
If garment has various kinds of bres, select the temperature for the bre that requires the
lowest temperature.
Dry ironing
The appliance sets temperature at dot , or , allows dry ironing(no steam).
Continuous steam ironing
It is possible to iron with continuous steam whenever the tank is lled with water and the
adequate temperature is selected.
Select the temperature at or
Select the desired steam regulator.
Press and hold steam button to release the continuous steam.
CAUTION: This function can not work under lower temperature dot
Burst steam
The burst steam feature provides additional steam for removing stubborn wrinkles.
Select the temperature at
Select the steam at “ ”.
Move the iron in a top to bottom direction while double click steam button to release the
burst steam.
Important: For cotton and linen, its recommended to put the iron base in contact with the
material. For other more delicated bres, it’s recommended to keep the iron base at some
centimetres of distance.
Self cleaning
Fill the water tank to Max level.
Connect the appliance to the mains, place the iron horizontally over the sink.
Press ON/OFF button 1 , product start pre-heating.
After heating 30’, press and hold steam regulator button 2 , on LED display light up with
GREEN color, the appliance start self cleaning function, gently rock the iron backwards and
forwards.
Self cleaning function can stop automatically after 1 mins. , or press steam regulator button
2 again, it can stop working.
After self cleaning, dry heat(no steam) the appliance for a while to dry the water in
soleplate, rub the soleplate with a damp cotton cloth folded several times.(Never use
scouring pads or chemicals)
Repeat the self cleaning process at least twice.
Notice: We recommend performing the process once a month to prolong the service life
Bekijk gratis de handleiding van Maestro MR-320C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Maestro |
| Model | MR-320C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3713 MB |
