Maestro MR-320C handleiding
Handleiding
Je bekijkt pagina 5 van 44
5
- Use iron only for its intended use.
- To protect against a risk of electric shock, do not immerse the iron in water or
other liquids.
- The iron should always be turned to ‘ O ’ before plugging or unplugging from outlet.
Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
- Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.
Loop cord loosely around iron when storing.
- Do not operate iron with a damaged cord or if the iron has been dropped or damaged.
To avoid the risk of electric shock, do not disassemble the iron take it to a qualied
serviceman for examination and repair. Incorrect reassembly can cause a risk of electric
shock when the iron is used.
- Close supervision is necessary for any appliance being used by or near children. Do not
leave iron unattended while connected or on an ironing board.
- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when
you turn a steam iron upside down - there may be hot water in the reservoir.
- Do not use it for commercial purpose.
Please note! Do not use chemical additive, scented substances or decalciers. Failure to
comply with the above-mentioned regulations leads to the loss of guarantee.
Operation
Before use
Remove the appliance’s protective package.
Prepare the appliance according to the function you wish to use.
Filling with water
Unplug the steam station before lling the water tank.
Slowly pour water through the water inlet.
Do not ll higher than “MAX” marked on the water tank, in order to avoid spilling out of
water.
NOTE: The use of demineralised water is recommended, especially if the water in your
area contains any type of grit or is “hard”(contains calcium or magnesium).
The water tank should be emptied after each use.
How to use
Uncoil the cable and steam tube completely before plugging it in.
Fill the water into tank to observe the MAX level.
Press both “PUSH” buttons to release the appliance, after using, press lock button to x
the appliance.
Connect the appliance to the mains, on LED display light up with GREEN color. Press
ON/OFF button 1 , product start pre-heating, on LED display light up with GREEN color
& on LED display light up with RED color. Press temperature button 3 , select desired
temperature. Press steam regulator button 2 , select desired steam control.
EN
Bekijk gratis de handleiding van Maestro MR-320C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Maestro |
| Model | MR-320C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3713 MB |
