Mackie MainStream handleiding
Handleiding
Je bekijkt pagina 30 van 64
MACKIE MATRIX LIVE STREAMING MIXER SOFTWARE
30
Parameter Setup – Gate (Easy)
Gates are typically used to reduce leakage from open microphones. Signals below the threshold level are muted, while signals
above the threshold get to pass through. The range control changes the rule slightly. Signals below the threshold are attenuated
by the amount of the range setting, while signals above the threshold get to pass through.
The operation of the gate is further modified by the hold control. Once the gate has opened, the hold time begins. The hold timer
resets any time the input signal crosses the threshold again, as long as it remains above the threshold. Afer the hold time
passes, the gain falls. The range control allows the gate to remain partly open, even if the input is below the threshold.
Hold — Hold sets a fixed time that the gate remains open once the signal drops below the threshold setting.
During the hold time, the gain is held constant. The range of the hold time varies from ms to 000 ms.
Range — Range determines how far the gain drops once the signal is below threshold. Setting the range control
to something in the -20 to -30 dB range allows some amount of signal leakage when the gate is closed, which
may make its action more subtle (less abrupt) and therefore less noticeable. The range of the gated signal varies
from –60 dB to 0 dB.
Threshold — Threshold determines the level at which the gate acts on the incoming signal. The range of the threshold
setting varies from –60 dB to 0 dB.
Like the EQ tab, simply mouse click in one of the min/max boxes and enter the minimum and maximum settings preferred.
Continue to do so for each parameter. On the far lef-hand side are several small gray boxes. Gate parameters that you
would like added to the final mix need to be engaged, as well. To do so, mouse click on the box to give it a green check mark.
We prefer full gate and checked all three boxes (as well as added some min/max settings), see below:
The last thing to do here is to click on “Apply” in the lower-right corner of the screen so the settings are saved and, well...
applied! Or click on “Discard changes” in the lower-lef corner of the screen to exit and return to the main Control Mode screen.
Parameter Low Value High Value
Hold ms 000 ms
Range –60 dB 0 dB
Threshold –60 dB 0 dB
Bekijk gratis de handleiding van Mackie MainStream, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mackie |
| Model | MainStream |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10845 MB |