Luxman SQ-38u handleiding
Handleiding
Je bekijkt pagina 14 van 16
12
Before Asking for Repair Services
While the unit is used, an unusual phenomenon may be confused as a malfunction for a certain reason. Prior to asking us
for repair services, please check the table below and read the instruction manual for the subsidiary devices. If the cause of
the malfunction cannot be identified, please contact your dealer.
Problem Cause Solution
No power is supplied even
though the operation switch is
pressed.
· The power plug is disconnected from the
wall outlet, or it is not completely inserted.
· Insert the power plug in the wall outlet se-
curely.
· The power plug is disconnected from the
AC inlet, or it is not completely inserted.
· Insert the power plug in the AC inlet se-
curely.
No sound is generated.
(for both left and right channels)
· The volume control is set to the minimum
level.
· Rotate the volume control clockwise to ad-
just the sound volume.
· The mute function is activated. · Cancel the mute function.
· The input selector is not set to the source to
be reproduced.
· Set the input selector to the source to be
reproduced.
· Cable connections are incomplete. · Make cable connections securely.
· The output level of the reproducing device is
set to the minimum position.
· Adjust the output level.
No sound is generated on one
side.
· The connecting cable is not connected on
one side only.
· Make cable connections securely.
Humming sound (boon or zzz
noise) is generated.
· The grounding side of the pin-plug cable
has no contact with the terminal.
· Be sure to connect the grounding side of
the pin-plug cable to the terminal.
· The ground wire of the record player is not
connected.
· Connect the ground wire of the record play-
er to the signal ground terminal.
· Connections or mounting conditions are in-
complete between the cartridge and shell,
or between the shell and tone arm of the
record player.
· Connect (or mount) the cartridge, shell, and
tone arm securely.
· The connecting cables are too close to the
power cable.
· Keep the connecting cables away from the
power cable.
· Induction noise is picked up from the power
transformer of another device.
· Install this unit away from other devices.
Bekijk gratis de handleiding van Luxman SQ-38u, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Luxman |
| Model | SQ-38u |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1317 MB |
